使用移液器吸頭時應先看本文!
更新時間:2022-11-26 點擊次數:890
移液器是生物研究中的實驗儀器,其配件吸頭在試驗中的使用數量也非常巨大。移液器吸頭作為一次性消耗品,可與液體樣品直接接觸,它不僅會(huì )影響到移液結果的準確性,有溶出及含有外來生物污染物會(huì )直接影響分析結果。
移液操作貫穿在幾乎所有實驗過程中,錯誤的移液會(huì )直接影響實驗結果,甚至導致實驗失敗。在使用移液器吸頭時應注意以下事項:
1、為追求良好的密封性,需要將移液套柄插入吸頭后,左右轉動或前后搖動用力上緊。也有人會(huì )用移液器反復撞擊吸頭來上緊,但這樣操作會(huì )導致吸頭變形而影響精度,嚴重的則會(huì )損壞移液器,所以應當避免出現這樣的操作。
2、吸取液體時一定要緩慢平穩地松開拇指,絕不允許突然松開,以防將溶液吸入過快而沖入取液器內腐蝕柱塞而造成漏氣。
3、為獲得較高的精度,吸頭需預先吸取一次樣品溶液,然后再正式移液,因為吸取血清蛋白質溶液或有機溶劑時,吸頭內壁會(huì )殘留一層“液膜”,造成排液量偏小而產生誤差。
4、濃度和粘度大的液體,會(huì )產生誤差,為消除其誤差的補償量,可由試驗確定,補償量可用調節旋鈕改變讀數窗的讀數來進行設定。
5、嚴禁吸取有強揮發性、強腐蝕性的液體(如,濃酸、濃堿、有機物等)。
6、不要用大量程的移液器移取小體積的液體,以免影響準確度。同時,如果需要移取量程范圍以外較大量的液體,請使用移液管進行操作。